ConverterHub

ND Filter Exposure Calculator

Enter your base shutter speed and ND stops to get the new exposure.

Result

256.00 s
4 min 16.0 s
1,024×

How it is calculated

Every stop of ND filtration halves the light, so the shutter must stay open twice as long: factor = 2^stops and new exposure = base × factor. Base is the shutter speed in seconds as a decimal number (1/125 s is 0.008) and stops is how many stops the filter blocks. The tool shows the new time in seconds with two decimals, the same time split into minutes and seconds, and the factor as a whole number followed by ×. Base must be above zero. Fractional stops such as 3.3 work, but the displayed factor is rounded to a whole number, so a filter of less than one stop shows a factor of 0× or 1×. The tool does no correction for long-exposure reciprocity effects.

Worked example

Your meter reads 1/4 s (0.25) at the chosen aperture and ISO, and you add a 10-stop filter. Factor: 2¹⁰ = 1,024×. New exposure: 0.25 × 1,024 = 256.00 s. In minutes: 256 ÷ 60 = 4 full minutes and 16.0 s left over, so the tool shows 4 min 16.0 s. A 6-stop filter on 1/125 s (0.008) would give 0.008 × 64 = 0.51 s.

Try this example →

Common mistakes

  • Typing the shutter speed as a fraction (1/125) or as the denominator (125); the field takes seconds, so write 0.008.
  • Mixing up filter names and stops: an ND1000 is about 10 stops, not 1000, and the name ND8 means 3 stops; enter stops, not the optical density or the factor.
  • Setting the stops to the number of filters stacked instead of the total; two 3-stop filters together are 6 stops.
  • Trusting very long exposures blindly: the tool does no reciprocity correction, so a calculated several-minute exposure may still come out darker than expected.
  • Changing aperture or ISO after calculating; the base shutter speed must be metered at the same settings you will actually use with the filter.

About this calculator

Each stop of neutral-density filtration halves the light reaching the sensor, so the corrected shutter speed is new shutter speed = base shutter speed × 2^stops — a 6-stop ND (like an ND64) turns a 1/125s exposure into a 32-second one, since 2^6 = 64.

Landscape and long-exposure photographers use ND filters to smooth moving water or clouds, or to allow a wide aperture in bright daylight, and this calculator lets them work out the new shutter speed before shooting rather than guessing and checking on the camera's built-in meter, which many ND filters are too dark for the meter to read directly.

Was this helpful?

You can pick up to 3 reactions.

Comments (0)

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators