ConverterHub

Scuba Weight Calculator

Enter your body weight, water type, and wetsuit to estimate your dive weight.

Result

27.0 lb
17.0 lb
10.0 lb

How it is calculated

The tool gives a starting lead weight in pounds. First it takes a share of your body weight in pounds: base = body weight × 0.10 in salt water or body weight × 0.05 in fresh water. Then it adds a fixed amount for the wetsuit: none 0 lb, 3 mm 5 lb, 5 mm 10 lb, 7 mm 15 lb. The total is weight needed = base + suit addition, shown to one decimal. It does not include your tank, BCD, fins, hood or a dry suit, nor body fat or the fact that your tank gets lighter as the air is used. Treat it as a first guess for a buoyancy check at the surface, where you adjust in small steps.

Worked example

A diver weighs 170 lb and will dive in the sea in a 5 mm wetsuit. In salt water the base is 170 × 0.10 = 17.0 lb. The 5 mm suit adds 10.0 lb. The total is 17.0 + 10.0 = 27.0 lb. Switching to a fresh-water lake with the same suit halves the base to 8.5 lb, so the total drops to 18.5 lb. With a 7 mm suit in fresh water the total would be 8.5 + 15 = 23.5 lb. The tool reports the weight needed, the base weight and the suit addition separately.

Try this example →

Common mistakes

  • Entering body weight in kilograms. The field is in pounds, so 77 kg must be entered as about 170, otherwise the weight is far too low.
  • Reading the result in kilograms. The answer is in pounds, so 27 lb is roughly 12 kg of lead.
  • Selecting salt water for a lake dive, or the reverse. Fresh water needs about half the base weight, so the wrong choice leaves you either too light or overweighted.
  • Treating the figure as final. Tank type, other equipment and your own body composition move the true value, so check at the surface with a near-empty tank and adjust.
  • Using the tool for a dry suit. Only the four wetsuit choices (none, 3, 5 and 7 mm) are covered, and any other garment adds nothing.

About this calculator

A diver in a wetsuit is naturally buoyant — the neoprene traps air that floats, and salt water is denser (and more buoyant) than fresh water — so extra lead is worn to descend and hold a controlled, neutral hover at depth. This calculator's starting estimate takes 10% of body weight in salt water, or 5% in fresh water (which is less buoyant), as a base — enter your weight in pounds — then adds 5, 10 or 15 lb for a 3, 5 or 7 mm wetsuit (thicker neoprene traps more air and needs more lead).

Too little weight leaves a diver unable to descend or hold a safety stop; too much wastes air fighting negative buoyancy and strains the back. Scuba instructors, dive shops and divers themselves use a starting estimate like this before fine-tuning with an actual buoyancy check at the surface, since body composition, exposure suit, tank material and gear all shift the ideal number.

Was this helpful?

You can pick up to 3 reactions.

Comments

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators