Albumin (g/dL) to Grams per litre Converter

How it is calculated

The conversion is a plain multiplication: g/L = g/dL × 10. One litre holds ten decilitres, so the same mass of albumin spread over a litre is ten times the figure quoted per decilitre. The tool multiplies the value you type by 10 and shows it with two decimals followed by the unit g/L. Going the other way, divide a g/L figure by 10 to get g/dL. The tool applies no range check, so zero or even a negative number is converted mechanically; it only changes the unit, not the meaning of the result. Whether a value is low, normal or high is decided by the reference range printed on the lab report, which differs between laboratories.

Common mistakes

• Dividing by 10 instead of multiplying. Moving from g/dL to g/L makes the number bigger, so 4.2 becomes 42, not 0.42.
• Confusing g/dL with mg/dL. One g/dL is 1,000 mg/dL, so a figure printed in mg/dL cannot be typed into this field as it is.
• Comparing a g/L result with a reference range written in g/dL. Always check that the value and the range use the same unit before judging whether it is low.
• Entering a value already in g/L. If the report says 42 g/L, typing 42 here returns 420 g/L, which is not a real albumin level.
• Using the tool for urine or other non-serum samples with different unit conventions. It converts only the unit, so make sure the sample type and its unit on the report are really g/dL.