ConverterHub

Terminal Velocity Calculator

Find the terminal velocity.

Result

42.78 m/s

How it is calculated

At terminal velocity the drag force equals the weight, so v = √(2 × m × g ÷ (ρ × A × Cd)). Here m is mass in kilograms, g is fixed at 9.81 m/s², ρ is air density in kg/m³, A is the cross-sectional area facing the airflow in m², and Cd is the dimensionless drag coefficient. The result is in metres per second with two decimals.

If density is left empty, zero or negative, the tool uses 1.225 kg/m³, the usual sea-level value. Mass, area and drag coefficient must all be above zero, otherwise there is no result. The model assumes constant density and a constant drag coefficient, so it ignores speed-dependent changes in drag and the thinner air at altitude unless you enter a lower density yourself.

Worked example

An 80 kg skydiver falls belly-down with a frontal area of 0.7 m² and a drag coefficient of 1.0, at the default density of 1.225 kg/m³. Weight term: 2 × 80 × 9.81 = 1,569.6. Denominator: 1.225 × 0.7 × 1.0 = 0.8575. Ratio = 1,569.6 ÷ 0.8575 = 1,830.4, and the square root is 42.78 m/s, about 154 km/h. In thinner air at 0.9 kg/m³ the same body settles at 49.91 m/s, which is why high-altitude falls reach higher speeds.

Try this example →

Common mistakes

  • Entering the mass in grams or pounds. The tool expects kilograms; a wrong unit changes the speed by the square root of the factor.
  • Using the total surface area instead of the cross-sectional area facing the flow. A person falling flat presents far less area than their whole body surface.
  • Mixing up area units, for example square centimetres instead of square metres.
  • Using a Cd that does not match the shape. A sphere, a flat plate and a parachute have very different drag coefficients.
  • Keeping the default sea-level air density for a high-altitude fall. Thinner air raises terminal velocity.

About this calculator

This calculator finds terminal velocity — the constant speed a falling object reaches when air resistance (drag) exactly balances gravity — using v = √(2mg / (ρACd)), where m is mass, ρ is air density, A is cross-sectional area and Cd is the drag coefficient.

Skydivers and physics students use it to understand why a falling body stops accelerating, and engineers use the same drag relationship when designing parachutes, projectiles and anything that falls or moves through air. A larger surface area or higher drag coefficient lowers terminal velocity; more mass raises it.

Was this helpful?

You can pick up to 3 reactions.

Comments (0)

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators