ConverterHub

R-Value Calculator

Find the R-value of an insulation layer.

Result

2.500 m²·K/W
0.400 W/m²·K

How it is calculated

The tool uses the SI form of thermal resistance: R = L ÷ k and U = 1 ÷ R. L is the layer thickness in metres and k is the thermal conductivity in W/(m·K), so R comes out in m²·K/W and U in W/(m²·K). Both inputs must be above zero. The result is for one homogeneous layer only; a wall with several layers adds the R-values of the layers (and surface films), then inverts the sum to get the overall U. This is the metric R-value. The US figure in ft²·°F·h/BTU is about 5.68 times larger.

Worked example

Take 100 mm of mineral wool, so L = 0.1 m, with k = 0.04 W/(m·K). Then R = 0.1 ÷ 0.04 = 2.500 m²·K/W. The U-value is 1 ÷ 2.5 = 0.400 W/m²·K. The layer has a thermal resistance of 2.500 m²·K/W; doubling the thickness would double R and halve U.

Try this example →

Common mistakes

  • Entering thickness in millimetres or centimetres. The tool expects metres, so 100 mm must be typed as 0.1, otherwise R is off by a factor of 1,000 or 100.
  • Comparing this R-value directly with US labels such as R-13. The units differ, and the metric value is about 5.68 times smaller for the same insulation.
  • Using the U-value of a single layer for a whole wall. Real walls need every layer added together, since insulation is not the only layer in the path of heat.
  • Using a conductivity measured at a different temperature or moisture state than the actual use. Wet insulation conducts more.

About this calculator

An insulation material's R-value measures its resistance to heat flow: R = thickness ÷ thermal conductivity (k), so thicker or less-conductive materials have higher R-values and insulate better. Its inverse, the U-value (U = 1/R), measures conductance instead — how easily heat passes through — and is the measure more commonly used in Europe for windows and building envelopes. For multiple layers (like a wall assembly), R-values simply add together.

Builders, architects, and energy auditors use R-values to select insulation that meets building-code minimums for a given climate zone, compare products (fiberglass batts, spray foam, rigid foam board all have different R-value-per-inch), and estimate a building's heating/cooling energy needs. Enter thickness and conductivity to find the R-value and U-value.

Was this helpful?

You can pick up to 3 reactions.

Comments (0)

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators