ConverterHub

Insulation R-Value Calculator

Find the R-value of insulation.

Result

R-18.90
3.33 RSI

How it is calculated

Thermal resistance adds up with thickness: R = r × (t / 2.54), where t is the thickness in centimetres, 2.54 converts it to inches, and r is the R-value per inch of the material. The tool uses these per-inch values: fiberglass 3.2, spray foam 6.5, cellulose 3.7, mineral wool 4.2. The result is in US units (R-value, ft²·°F·h/BTU), and a second figure converts it to metric RSI with RSI = R × 0.1761. These are typical textbook values; real products vary, and compressing batts lowers the value. Thickness cannot be negative.

Worked example

15 cm of fiberglass. Convert to inches: 15 / 2.54 ≈ 5.91 in. Multiply by 3.2 per inch: 5.91 × 3.2 ≈ 18.9, shown as R-18.90. In metric that is 18.90 × 0.1761 ≈ 3.33 RSI. Swapping to spray foam at 6.5 per inch would give about R-38.4 for the same thickness.

Try this example →

Common mistakes

  • Entering the thickness in inches although the field is in centimetres; the result comes out 2.54 times too large.
  • Mixing R and RSI values when comparing to a local code; RSI is about one sixth of R.
  • Assuming the number applies to the whole wall; studs, gaps and thermal bridges lower the real value.
  • Stacking layers of different materials in one entry; calculate each layer and add the R-values.
  • Compressing insulation to fit a thinner cavity, which drops the R-value per inch.

About this calculator

This calculator finds the R-value of an insulation material — its resistance to heat flow — from the material's thickness and its R-value per inch (or per unit thickness), since R-value scales linearly: total R = thickness × R-per-inch. A higher R-value means better insulating performance.

Homeowners and contractors use it to compare insulation options (fiberglass batts, spray foam, rigid foam board) and to check whether a wall, attic, or floor assembly meets local building-code minimums. Energy auditors also use R-value totals when estimating a building's heat loss.

Was this helpful?

You can pick up to 3 reactions.

Comments (0)

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators