ConverterHub

Decibel (dB) Gain Calculator

Find the gain in decibels.

Result

20.00 dB

How it is calculated

The decibel expresses a ratio of two power values on a logarithmic scale: dB = 10 × log10(P1 ÷ P0). P1 is the measured or output power and P0 the reference or input power, in the same unit (watts, milliwatts, anything). Both must be above zero because the logarithm of zero or a negative number does not exist. A positive result means gain, a negative one means loss, and 0 dB means no change. Every tenfold increase in power adds 10 dB and a doubling adds about 3 dB. For voltage or sound pressure the factor is 20 rather than 10, which this power formula does not use.

Worked example

An amplifier takes in 2 W and delivers 200 W. The ratio is 200 ÷ 2 = 100. log10(100) = 2. Multiply by 10: 10 × 2 = 20. The tool shows 20.00 dB. Swapping the two values gives −20.00 dB, a loss of the same size.

Try this example →

Common mistakes

  • Using this power formula for voltage or current. For amplitudes the multiplier is 20, so the same ratio would give twice as many dB.
  • Mixing units between the two powers, such as watts and milliwatts. The ratio would be off by 1,000, adding 30 dB by mistake.
  • Entering the dB values themselves. The fields take plain power, not decibel numbers.
  • Swapping input and output and misreading the sign. The reference goes in P0; a negative answer means attenuation.
  • Adding ratios instead of dB values in chains. Gains in dB add up; the underlying ratios multiply.

About this calculator

This calculator finds the power gain between two power levels using the logarithmic formula dB = 10 × log₁₀(P2/P1), converting a ratio that can span many orders of magnitude (like a 1,000,000:1 power increase) into a manageable number (60 dB) — because decibels compress multiplicative changes into additive ones, doubling power always adds exactly 3 dB regardless of the starting level.

Audio engineers setting gain staging on a mixing console, RF and telecom engineers calculating signal loss over a cable run or antenna gain, and electronics hobbyists comparing amplifier specifications all use decibels because sound and signal power are perceived and measured logarithmically, not linearly.

Was this helpful?

You can pick up to 3 reactions.

Comments (0)

  • Be the first to comment.

Popular calculators

Loan Calculator

Monthly payment, total interest and full amortization schedule.

Percentage Calculator

Percent change, percent of, and ratio calculations.

Discount Calculator

Calculate final price, savings, and discount amount.

BMI Calculator

Body mass index from height and weight (metric or imperial).

Age Calculator

Compute your exact age in years, months and days from a birth date.

Compound Interest Calculator

Calculate the final amount and interest earned with compounding.

All Calculators